CHENGLI SPECIAL AUTOMOBILE CO.,LTD
I. Details of Sinotruk HOWO 160hp 4X2 8CBM Garbage Compactor Truck for wastement
[Function introduction of compressed garbage truck]:
1. Compressed garbage truck, also known as after-loading compressed garbage truck, is a new type of sanitation vehicle that collects and transfers garbage to avoid secondary pollution. The after-loading filler is used to dock with the trash can or the trash hopper, and they are combined into a mobile garbage transfer station to realize the pollution-free collection and removal of garbage in one vehicle and multiple buckets. Effectively prevent secondary pollution caused by scattering and flying during collection and transportation.
2. Combined control of gas, electricity and hydraulic pressure. The vehicle's control system comprehensively utilizes the advantages of electric control, air control and hydraulic control. The air control system is controlled by the electronic control system, and the operation of the hydraulic valve group is controlled by the air control system, which improves the reliability and efficiency of use.
3. Advanced electronic control system. Using PLC (programmable controller) integrated control, the control circuit is generated in the PLC, and the logic loop is adopted to ensure that the operation instructions are executed in order, and at the same time to ensure that the operation instructions are interlocked, and only external wiring is connected, which reduces the occurrence of failures, To avoid accidents caused by misoperation and improve reliability;
4. Hydraulic lifting safety circuit. In the hydraulic system of the lift loader, a one-way balance valve is set. The valve not only guarantees the steady lowering of the filler, but also cuts off the direct connection between the lifting cylinder and the hydraulic oil pipe. Even if the oil pipe bursts, the filler will not fall suddenly, which improves the safety of use.
5. The compressed garbage truck is in a closed state during compression, filling and transportation. A unique drain valve is installed on the sewage tank, which is reliable in sealing and not easy to be blocked. The optional filler completely covers the feeding port of the filler, eliminating the phenomenon of flying garbage and dust caused by the disturbance of the tail air flow during the transfer process, and the appearance is more beautiful.
Features:
Can choose 240L(single bin,double bins)or 360L,660L,1100L standard bin lifting and turn over mechanism,can also choose ground hopper and other kinds of loading mechanism.
Drawing Of Compressed Garbage Truck:
II.Technical of HOWO 5t 5m3 Compressed Garbage Truck on promotion.
| SINOTRUK HOWO 5,000L Compressed Garbage Truck |
|
| Chassis |
|
| Chassis model |
ZZ1047D3415C145 |
|
| Overall dimensions(mm) |
5995×2250×2450(mm) |
|
| Wheel base(mm) |
3360 |
|
| Driving type |
4×2 |
|
| Steering |
Left drive hand |
|
| Approach/departure angle(°) |
20/18 |
|
| Front /rear overhang(mm) |
1160/1475 |
|
| Axle (front/rear) |
2.4t/4.2t |
|
| Wheel track(front/rear)(mm) |
1825/1595 |
|
| Tyre size |
7.50R16 all-steel tire |
|
| Tyre number |
(6+1)one spare tire |
|
| Max driving speed(km/h) |
90 |
|
| Engine model |
YN4102QBZL |
|
| Engine Fuel type |
Diesel |
|
| Engine power(HP) |
116 |
|
| Max Output Power (kw) |
85 |
|
| Cylinder number |
4 |
|
| Emission standard |
Euro 3 |
|
| Engine manufacturer |
yunnei |
|
| Transmission model |
WLY646 |
|
| Brake |
Oil break system |
|
| Cabin |
|
| Garbage Bin Capcity |
5000L |
|
| Garbage Bin Dimensions |
3300×1980×1765 (mm) |
|
| Garbage Bin Material |
Q235B carbon steel |
|
| Garbage Bin Thickness |
Side 3mm, Bottom 4mm |
|
| Filling time |
8-10s |
|
| Discharging type |
Push and self-discharging |
|
| Discharging time |
30-40S |
|
| Hydraulic system pressure |
16Mpa, 160Bar |
|
| Control type |
Electric control with manual control |
|
| Plat Form |
2 side for 2 worker for foot transport |
|
| Ways of Loading |
Rear Loading with optional Bucket Lifting Style |
|
| Garbage Compact Ratio |
1/5 - 1/2 |
|
| Control System |
One control Panel on the back, One Control system in back of Cabin |
|
| Dispensing System |
1. Equipped with air-tight dustbin, hydraulic system and operating system.
2. Automatic loading, compressing and discharging, all handled by 1 person.
3. Sewage water collection tank to avoid any pollution during handling.
4. Large Pressure, Good Leakage Proof, Convenient Operation ,Dependable Security.
Electrical Control Panel for compacting system. |
|
|
|
|
|
|
|
|
|
1--Rubbish Compactor Truck is consisted of compactor garbage truck, swing arm garbage truck, hook lift garbage truck,roll on roll off garbage truck, bin lift garbage truck,dumper garbage truck,sealed garbage truck,container garbage truck,rear load garbage truck and so on.
2--Easy Full Automatic Operation: computer control system for loading and unloading operations.
3--One Person Operation: Reducing sanitation working, greatly improves the working environment.
4--Double Operation System: computer control system and manual operation greatly improve+s the vehicle usage rate.
5--Capacity: option for 3-20m3 22M3, 24M3 garbage truck.
6--Steering wheel: both left and right hand drive,meet the needs of different countries.
7--Emission standard: option Euro 1,Euro 2,Euro 3,Euro 4,Euro 5 garbage truck.
8--Truck chassis: option for Japanese and Chinese brand,such as Dongfeng,faw,Foton,HOWO,JAC,JMC SHACMAN, for land...
How does it work?
III.Details Show:
1.Compacting System
Include collecting Panel & Pressing Panel.All made of high tension steel with long time use
2.Loading System
Lifting system are chose as per customer requirement,including Barrel Lifting,Square Container Lifting,Skid Loader lifting system.
3.Compact System Lifting
Lifting system choose as per customer requirement,including Barrel Lifting,Square Container Lifting,Skid Loader lifting system.
4.Sewage Container
The bottom of the tank is equipped with a sewage collection tank to prevent the sewage in the tank from leaking out, effectively preventing the occurrence of secondary pollution.
5.Rear Full Electronic Control
Electronic control Panel install in the back of the container body for easy handling. Imported PLC Control System with auto & semi-auto control. Optional Inside Cabin Control
6.Manual Handle Control
The hydraulic controller at the rear of the cab controls the work of the reversal mechanism and the pressure filling mechanism to ensure the accuracy and reliability of each mechanism and improve the reliability of the vehicle..
7.Lift hydraulic strut
IV.Flip form
V.Product Details:
Working condition photo
VI. PROCEED PRODUCTION OF COMPRESSED GARBAGE TRUCK
VII. PRODUCT SHIPPING (RORO OR BULK SHIP)
RORO: The truck is driven to the ship inside directly and fixed well. It can protect the truck being rusty and broken during shipping.
BULK: The truck is lifted by crane then put on the vessel deck. This model is much cheaper.
CONTAINER: The truck is put into the container. This model is used for small model trucks.
VIII. COMPANY INFO
HUBEI CLW AUTOMOBILE CO.,LTD is an authorized special truck manufacturer which has many years in design ,product ,sales and service in special trucks like as boom truck , fire truck, manlift truck, tank truck , garbage truck, tipper truck , wrecker truck , refrigerated truck and etc. Main info as below:
(1) More than 500 workers, large and advanced production;
(2) 25 professional engineers, can offer the best and cheapest design;
(3) Build strict QC team to guarantee the quality;
(4) 1 year or 30,000km warranty which comes first.
(5) One set of spare parts of chassis provided which will help you save money on maintenance.
(6) Provide technical support and after service for life.
(7) Professional sales team which will help you to choose suitable truck.
Products
Sinotruk HOWO 160hp 4X2 8CBM Garbage Compactor Truck for wastement
Audited Supplier 
){kind=link}